http://keyfobprogram.com/m/ Note: All existing transmitters will need to be reprogrammed during this procedure M 1. Close all vehicle doors. 2. Insert key into ignition 3. Hold down the UNLOCK button on the driver side door panel. Continue to hold down until instructed to release i
keyfobprogram.com/fd2 You must have 2 original keys that start your engine to perform this procedure. If you only have one working key or none at all it must be programmed by a dealer or locksmith! Your New third (unprogrammed) key must also be cut prior to performing this procedure.
www.keyfobprogram.com/ni1 Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive. 1. Close and lock all doors with the driver’s side power lock switch located on drivers door panel. 2. Insert
www.keyfobprogram.com/fd1 FORD REMOTE – THIS PROCEDURE RESETS ALL REMOTES FOR THE VEHICLE. ALL FUNCTIONING REMOTES WILL HAVE TO BE REPROGRAMMED DURING THE PROCEDURE There are a few different procedures that will program your remotes depending on what vehicle that you have. You can fi